Guangzhou FuTeBang Hydraulic Machinery Equipment Co., Ltd.
Guangzhou FuTeBang Hydraulic Machinery Equipment Co., Ltd.
Add to Cart
Excavator Engine Parts Cylinder Block Assy 4D102 6731-21-1130
Specification
| Name | Excavator diesel Cylinder Block |
| Condition | New |
| Part NO. | 6731-21-1130 |
| Engine model | 4D95 |
| More series: | 4BD1, 4BG1, 6BD1, 6BG1, 6SD1, 6WG1, 4LE1, 4LE2, 6RB1, 4JB1, 6HK1... |
| Stock condition | In stock |
| Size | STD |
| Category Group | Engine parts |
| related products |
1. Piston set 2. Liner 3. Piston ring 4. Main bearing 5. Connecting rod bearing 6. Trust washer 7. Full gasket kit 8. Water pump 9. Valve seal |
More Engine model for Cylinder block:
1.6D102 6BT5.9 3966454
2. 4D102
3. 4BD1 4BG1
4. 4BT3.9 3920005
5. 6CT8.3 6D114 3973493
6. E3306 8N1187
7. E3304 8N1188
8. E3304 6R2378
9. E3306 8N6797
10. DB58
11. 6BD1 6BG1
12. 4D130
It shall have the following properties:
(1) have enough strength and stiffness, small deformation, ensure that the movement of parts in the correct position, normal operation, small vibration noise.
(2) have good cooling performance, in the cylinder cylinder around the cooling jacket, in order to allow cooling water to take heat.
(3) wear resistance, to ensure that the cylinder block has enough service life.
Cylinder block is the upper side of the cylinder cylinder, currently more set with cylinder sleeve.The lower part of the cylinder block is the crankcase, which is used to install the crankshaft.Most of the cylinder blocks are made of cast iron or aluminum alloy. Aluminum alloy cylinder blocks are more and more widely used because of their high cost, light weight and good cooling performance.
FAQ
|
1Q: |
Do you have your own factory? Can we have a visit?
|
| 1A: |
Absolutely, you are always welcome to visit our factory.
|
| 2Q: |
How do you control the quality of the products?
|
| 2A: |
Our factory obtained the ISO9001 CERTIFICATE.Every process of the production is strictly controlled. And all be products will be inspected by QC before shipment.
|
| 3Q: |
How long is the delivery time ?
|
| 3A: |
2 to 7 days for ex-stock orders. 15 to 30 days for production.
|
| 4Q: |
What kinds of pumps you mainly manufacture?
|
| 4A: |
We mainly produce the water pump,gear pump,oil pump,fuel pump,fuel transfer pump,cleaning pump ,air compressor ect.
|
| 5Q: |
Can we print our company logo on product and package?
|
| 5A: |
Yes, but the quantity of the order is required. And also we need you to offer the Trademark Authorization to us.
|
| 6Q: |
Can you provide OEM BRAND package?
|
| 6A: |
No, we can only offer our company package,blank package if you need, and the Buyers' Brand as authorized.
|
| 7Q: |
How long is the warranty period?
|
| 7A: |
3 months
|